PC Assembly Guide

Follow this step-by-step guide to build your PC safely and efficiently. Take your time with each step and refer to your component manuals as needed.

Always ground yourself before handling components and work in a static-free environment. Read all manuals before starting and if unsure, consult an expert.

Preparation

Set up your workspace and gather necessary tools.

Steps:

• Clear, well-lit workspace

• Phillips head screwdriver

• Anti-static wrist strap (recommended)

• Thermal paste

• Cable ties for management

Pro Tips:

Work on a hard, non-carpeted surface

Keep screws organized in small containers

Read your manuals before starting

Have a parts checklist ready

Warnings:

Avoid working on carpet to prevent static

Keep drinks away from workspace

Power Supply Installation

Install the PSU in the case first for better workspace management.

Steps:

• Orient PSU fan according to case design

• Secure with provided screws

• Route main power cables

• Keep other cables bundled for now

Pro Tips:

Check case manual for PSU orientation

Don't connect cables to components yet

Plan cable routing paths

Warnings:

Ensure proper PSU orientation for airflow

Don't overtighten screws

Motherboard Preparation

Prepare the motherboard before installing in the case.

Steps:

• Install CPU in socket

• Apply thermal paste

• Mount CPU cooler

• Install RAM in correct slots

• Install M.2 SSDs if using

Pro Tips:

Check RAM slots in manual for dual-channel

Use pea-sized thermal paste amount

Align CPU triangle with socket

Test-fit cooler mounting hardware

Warnings:

Never force CPU into socket

Don't touch CPU or socket pins

Don't overtighten cooler mount

Case Preparation

Prepare the case for motherboard installation.

Steps:

• Install I/O shield/integrated I/O

• Install standoffs if needed

• Check front panel cables

• Plan cable routing paths

Pro Tips:

Count standoffs vs motherboard holes

Pre-route cables before motherboard

Note case fan locations

Warnings:

Ensure proper standoff placement

I/O shield edges can be sharp

Motherboard Installation

Mount the motherboard in the case.

Steps:

• Carefully lower into case

• Align with standoffs

• Secure all screws

• Connect front panel cables

• Connect case fans

Pro Tips:

Start with corner screws

Don't fully tighten until all aligned

Reference manual for front panel connections

Warnings:

Support board while securing screws

Verify no cables are pinched

GPU Installation

Install the graphics card and connect power.

Steps:

• Remove PCIe slot covers

• Insert GPU into top PCIe slot

• Secure bracket screws

• Connect power cables

Pro Tips:

Support GPU while securing

Route power cables neatly

Consider GPU sag prevention

Warnings:

Ensure PCIe latch is open

Don't force card into slot

Use separate PCIe power cables for high-end GPUs

Storage Installation

Mount and connect storage drives.

Steps:

• Install 2.5"/3.5" drives in bays

• Connect SATA power cables

• Connect SATA data cables

• Secure all drives properly

Pro Tips:

Plan cable routing for each drive

Label SATA cables if needed

Use all mounting points

Warnings:

Don't overtighten drive screws

Mind cable bend radius

Cable Management

Organize and secure all cables.

Steps:

• Route cables behind motherboard tray

• Group similar cables together

• Secure with zip ties or velcro

• Ensure proper airflow paths

Pro Tips:

Take your time with routing

Use case tie points

Leave some slack for future access

Warnings:

Don't zip tie too tight

Avoid blocking fans

Final Steps

Verify all connections and prepare for first boot.

Steps:

• Double-check all connections

• Verify CPU power is connected

• Check GPU power connections

• Ensure fans are connected

• Close up case

Pro Tips:

Take photos for future reference

Keep manuals for troubleshooting

Test before closing case

Warnings:

Don't forget to remove protective films

Ensure no loose screws inside case

Troubleshooting Tips

If PC Doesn't Power On:

• Check PSU switch and power cable

• Verify front panel connections

• Reseat RAM and power connections

If No Display:

• Verify monitor input and cable

• Reseat GPU and power cables

• Try one RAM stick at a time